Lihlahisoa
Metsi e thehiloeng ho fafatsa texture sand royal pente bakeng sa ntlo
Pente ea lehlabathe la sebopeho
Pele
Kgutla
Tekheniki Parameters
| Se qalang | Texture Sand Top Coating | Varnish (ho ikhethela) | |
| Thepa | Ha e na Solvent (Metsi a thehiloeng) | Ha e na Solvent (Metsi a thehiloeng) | Ha e na Solvent (Metsi a thehiloeng) |
| Omileng filimi botenya | 50μm-80μm/lera | 2mm-3mm / lera | 50μm-80μm/lera |
| Kakaretso ea khopolo-taba | 0.15 lik'hilograma/㎡ | 3.0 lik'hilograma/㎡ | 0.12 lik'hilograma/㎡ |
| Omisa | ＜2h (25℃) | 12h (25℃) | ＜2h (25℃) |
| Nako ea ho omisa (ka thata) | Lihora tse 24 | lihora tse 48 | Lihora tse 24 |
| Bolumo bo tiileng% | 60 | 85 | 65 |
| Lithibelo tsa kopo Min.Temp.Max.RH% | (-10) ~ (80) | (-10) ~ (80) | (-10) ~ (80) |
| flash point | 28 | 38 | 32 |
| Bolela ka setshelong | Ka mor'a ho hlohlelletsa, ha ho na caking, e bontšang boemo bo tšoanang | Ka mor'a ho hlohlelletsa, ha ho na caking, e bontšang boemo bo tšoanang | Ka mor'a ho hlohlelletsa, ha ho na caking, e bontšang boemo bo tšoanang |
| Thehaho | Ha ho bothata ba ho fafatsa | Ha ho bothata ba ho fafatsa | Ha ho bothata ba ho fafatsa |
| Nozzle orifice (mm) | 1.5-2.0 | 6-6,5 | 1.5-2.0 |
| Khatello ea Nozzle (Mpa) | 0.2-0.5 | 0.5-0.8 | 0.1-0.2 |
| Ho hanyetsa metsi (96h) | Tloaelehileng | Tloaelehileng | Tloaelehileng |
| Acid resistance (48h) | Tloaelehileng | Tloaelehileng | Tloaelehileng |
| Alkali resistance (48h) | Tloaelehileng | Tloaelehileng | Tloaelehileng |
| Khanyetso e mosehla (168h) | ≤3.0 | ≤3.0 | ≤3.0 |
| Hlatsoa ho hanyetsa | 3000 linako tse ling | 3000 linako tse ling | 3000 linako tse ling |
| Khanyetso ea ho senya /% | ≤15 | ≤15 | ≤15 |
| Ho kopanya karo-karolelano bakeng sa metsi | 5%-10% | 5%-10% | 5%-10% |
| Bophelo ba tšebeletso | > lilemo tse 15 | > lilemo tse 15 | > lilemo tse 15 |
| Nako ea polokelo | 1 selemo | 1 selemo | 1 selemo |
| Coatings mebala | Mebala e mengata | Motho a le mong (Lehlabathe le ka ba mebala) | Tse pepeneneng |
| Mokhoa oa kopo | Roller kapa Spray | Roller kapa Spray | Roller kapa Spray |
| Polokelo | 5-30 ℃, e pholile, e omme | 5-30 ℃, e pholile, e omme | 5-30 ℃, e pholile, e omme |
Litaelo tsa Tšebeliso
Substrate e entsoeng esale pele
Setlatsi (boikhethelo)
Se qalang
Texture Sand Top Coating
Varnish (ho ikhethela)
| Kopo | |
| E loketse mohaho oa khoebo, mohaho oa sechaba, ofisi, hotele, sekolo, sepetlele , lifolete, villa le tse ling tse ka ntle le ka hare ho mokhabiso oa holim'a metsi le tšireletso. | |
| Sephutheloana | |
| 20kg/barrel. | |
| Polokelo | |
| Sehlahisoa sena se bolokoa ka holimo ho 0 ℃, moea o kenang hantle, o moriti le sebaka se phodileng. |
Taelo ea ho Sebelisa
Maemo a Kaho
Maemo a kaho ha aa lokela ho ba nakong ea mongobo le boemo ba leholimo bo batang (mocheso ke ≥10℃ le mongobo ke ≤85%).Nako e ka tlase ea kopo e bolela mocheso o tloaelehileng oa 25 ℃.
Mohato oa Kopo
Ho lokisa holim'a sefahleho :
Ntlha ea pele, ho hlokahala phekolo ea motheo pele u sebelisa pente ea lehlabathe la texture.Lerako le hloka ho ntšoa le ho hloekisoa ka kakaretso ho le boloka le omme ebile le le lecha.Ka mor'a phekolo, ho lokela ho etsoa ho belisoa ha lebota la pele ho etsa bonnete ba hore bokaholimo ba lerako bo boreleli ebile ha bo na litšila.Ka mor'a moo, tlatsa likheo leboteng ka caulk.Ha o tlatsa manonyeletso, o ka khetha lisebelisoa tsa ho tlatsa ka kopanelo ka boholo bo fapaneng ba likaroloana ho latela litlhoko tsa hau ho fihlela phello e ntle.
Pele :
Ka mor'a phekolo ea motheo le caulking, kopo ea primer e hlokahalang.The primer e sebelisitsoeng ke sekhomaretsi se phahameng le ho tlatsa primer e leng senotlolo sa kopo e atlehileng.Nakong ea ts'ebetso ea ho penta, e lokela ho penta ka mokhoa o ts'oanang ka litsela tse fapaneng ho etsa bonnete ba hore lebota le koahetsoe ka ho feletseng.Kamora ho sebelisa primer, emela hore e ome ka botlalo, eo hangata e nkang lihora tse 24.
Moaparo o ka holimo oa lehlabathe:
Ha primer e omme ka ho feletseng, o ka qala ho sebelisa pente ea lehlabathe.Ntlha ea pele, thepa e lokela ho tsosoa ka mokhoa o ts'oanang, ebe e sebelisoa ho latela tataiso ea lerako la lerako.Setaele se ka beoa ka holimo kapa ka holimo, empa hoa hlokahala ho etsa bonnete ba hore mosebetsi oa ho lokisa pele ho penta ho phethoa ka katleho ho fumana phello e lakatsehang.Ha phello e lakatsehang e finyelloa, sebelisa lesela le hloekileng le holimo la lesela la satin holim'a pente ea lehlabathe 'me u eme nako e itseng ho etsa qeto ea hore na u hloka ho phunya hape ho ea ka khetho ea hau.
Litemoso
Ts'ebetsong ea ho etsa pente ea lehlabathe la Texture, ho na le lintlha tse ling tse hlokang tlhokomelo.Pele ho tsohle, ho lokela ho hloekisoa ka ho feletseng pele u sebelisa pente ea lebota ho boloka lerako le omme ebile le hloekile.Taba ea bobeli, ha u sebelisa primer, u lokela ho ela hloko kabo e tšoanang ea primer, e thusang ho boloka bokaholimo bo pentiloeng le lerako le pentiloeng le tlamiloe ka thata.Qetellong, pele o sebelisa pente ea lehlabathe, ho kgothaletswa ho etsa ts'ebetso e hlokolosi le ho lokisoa holim'a lerako ho netefatsa hore bokaholimo bo boreleli, bo sa tsitsa ebile bo ntle.
Hloekisa
Ka mor'a hore lerako le pentiloe, lisebelisoa li lokela ho hloekisoa.Ntlha ea pele, tšela pente e setseng ka nkhong ea pente.Haeba ho hlokahala, pente e ka tšeloa pele e tšeloa ka linkhong tsa pente.Ho feta moo, borashe ba pente bo hloka ho hloekisoa.Motsoako oa ho hloekisa e ka ba metsi kapa ntho e 'ngoe e loketseng ea ho hloekisa e kang asene kapa soda.Koahela borashe ba pente ka tharollo e tsoakiloeng, ebe u e hlakola ka bonolo ka lesela le mongobo kapa sesepa.
Lintlha
Lintho tse 'maloa tseo u lokelang ho li ela hloko nakong ea kaho ea pente ea lehlabathe la texture ke: Ntlha ea pele, ho kgothaletswa ho qala kaho ho tloha leboteng le lenyenyane ho itloaetsa mokhoa oa ho penta le ho etsa boiteko bo eketsehileng ba ho e sebelisa ka nepo.Ntlha ea bobeli, pele ho mebala ea mebala, lipatlisiso tsa bohlokoa li lokela ho etsoa ho netefatsa hore mokhoa oa hau oa ho qapa o phethehile, o loketse ebile o phutholohile.Qetellong, ka mor'a hore kaho e felile, tlhahlobo e haufi-ufi le tlhokomelo e hlokahalang ho boloka pente ea lehlabathe ea sebopeho e le boemong bo phethahetseng.
Litlhaloso
Pente ea lehlabathe la motsoako ke pente e ikhethang ea lerako e ka fang kamore sebopeho se ikhethang le phello ea pono.Leha ho le joalo, e le ho netefatsa katleho ea kaho, re tlameha ho ela hloko ho lokisoa ha lerako, ho sebelisa pente e ntle ea primer le lehlabathe, 'me re nahane ka hloko le ho rera sebaka sa kaho le ts'ebetso ea phekolo ea pente.Ho ea ka litlhahiso tse ka holimo, ho hahoa ha pente ea lehlabathe la texture ho ka u lumella ho emela lerako la hau le letle le lakatsehang ka nako e khutšoanyane.
